A clay mixer turns dry clay powder and water, or a bucket of scraps, into moist clay in one batch. It is a big purchase: the plastic clay mixers here weigh 175 to 850 lb and most cost several thousand dollars. This clay mixer guide compares the main models sold to US studios by batch size, motor and the electrical figures their makers and dealers publish. It is research-based; we did not test these machines. Where the published figures disagree, we show both.
Quick picks
- Best for a home or small studio: Soldner Studio Clay Mixer (150 lb batch, 1.5 HP, 120 V option)
- Best stainless hopper mixer: BlueBird 12SD (125 lb batch, sealed lid, 120 V or 240 V)
- Best for 250 lb batches: BlueBird 24SD (dumping bucket, 1.5 HP, 240 V)
- Best for schools: Soldner Professional Clay Mixer (about 300 lb batch, 5 HP)
- Best for slip and wet reclaim: Lehman Mity Mite Elite (10 gallon tank, 1/2 HP)
- Best mixer that also pugs: Peter Pugger PM-50 (140 lb batch, mixes from powder)
Clay mixers compared
| Mixer | Type | Batch | Motor | Electrical (published) | Weight | Price |
|---|---|---|---|---|---|---|
| Soldner Studio | Rotating tub | 150 lb wet | 1.5 HP | 120, 208 or 240 V; 1 or 3 phase | 550 to 600 lb crated | Check price |
| BlueBird 12SD | Horizontal hopper | 125 lb wet | 1/2 HP | 120 V or 240 V; 120 V not GFCI compatible | 175 lb | Check price |
| BlueBird 24SD | Dumping hopper | 250 lb wet | 1.5 HP | 240 V single or 208 to 230 V three phase | 400 lb | Check price |
| Soldner Professional | Rotating tub | About 300 lb wet | 5 HP | 208 or 240 V single; 208, 240 or 460 V three phase | 850 lb crated | Check price |
| Lehman Mity Mite Elite | Slip mixer | 10 gallon tank | 1/2 HP | Not published in listings read | Not published | Check price |
| Peter Pugger PM-50 | Pugmill-mixer | 140 lb moist | 2 HP | 240 V single phase, 16 A (maker) | 400 lb crated | Check price |
What a clay mixer does, and the four types
A clay mixer blends dry clay and water, or wet and dry scraps, into an even, plastic mass. It does not de-air the clay, so mixed clay still needs wedging or a trip through a pug mill before it goes on the wheel. Ceramic Arts Network and The Ceramic Shop describe the main types:
- Soldner (vertical) mixers: a chain-driven concrete tub turns slowly while stationary bars plough the clay. Designed by Paul Soldner. No sharp blades or augers.
- Hopper (horizontal) mixers: adapted from dough mixers, with a horizontal mixing shaft under a top lid. BlueBird builds this type.
- Slip mixers and reclaimers: a propeller on a shaft in a tank, for slip, glaze and slurry, not stiff clay.
- Pugmill-mixers: a mixing chamber feeding an auger, so the machine mixes and then extrudes. Our pug mill guide covers these in depth.
Soldner Studio Clay Mixer: best for a home or small studio
The Soldner Studio is the smaller of the two Soldner mixers and the only full-size clay mixer here sold with a 120 V option. Dealers list a 150 lb wet batch, a 1.5 HP motor and a 23 in diameter concrete tub 15 in deep, turned by a chain drive with a 10 to 1 gearbox. Stainless steel bars work the clay as the tub turns, and the guards and open-lid shutoff stop the machine when the lid is lifted.
The electrical figures differ between dealers, which matters for planning a circuit. Clay-King lists single phase 115 V at 12.4 A with a dedicated circuit recommended, plus 208 V and 230 V single and three phase options. New Mexico Clay lists 120 V single phase at 18 A, and its product title says 20 A. We could not find a Soldner spec page of the maker’s own, so get the motor plate figures from the dealer before you order and have a licensed electrician check or install the circuit.
It is heavy and slow to arrive. Shipping weight is 550 lb per New Mexico Clay and 600 lb per The Ceramic Shop, and Clay-King quotes an 8 week lead time by freight. The warranty is 5 years on the tub and 1 year on the electrical parts.
- Batch: 150 lb wet
- Motor: 1.5 HP; 10 to 1 gearbox
- Electrical: 115 V 12.4 A (Clay-King) or 120 V 18 A (New Mexico Clay); 208 and 230/240 V, single or three phase
- Tub: 23 in diameter, 15 in high, concrete
- Warranty: 5 years tub, 1 year electrical
- Price band: about $10,000 to $10,500 at US dealers in October 2026; some quote by phone; check the live price
Pros
- 120 V option
- No blades or augers
- Lid shutoff and guards
- Long tub warranty
Cons
- Amp figures differ between dealers
- 550 to 600 lb
- Freight and lead time
Who should skip it: solo hobby potters using under a few hundred pounds of clay a month.
Source conflict: Clay-King lists 12.4 A at 115 V; New Mexico Clay lists 18 A at 120 V and 20 A in its title. Crated weight is 550 lb (New Mexico Clay) or 600 lb (The Ceramic Shop).
BlueBird 12SD: best stainless hopper mixer
BlueBird’s 12SD is a horizontal hopper mixer built almost entirely from stainless steel: a 304 stainless bucket, a 1/4 in 304 stainless auger and a welded, powder-coated steel frame. BlueBird rates it for 125 lb wet batches and about 10 to 20 minutes of mixing per batch. The sealed lid holds dust in, and a safety switch on the waterproof variable frequency drive stops the blade when the lid opens.
Variable speed is a real plus for a small studio. BlueBird says it suits slip mixing as well as plastic clay, so one machine can handle reclaim slurry and fresh clay. At 175 lb and 27 x 24 x 32 in overall, with locking casters, it is the most compact plastic clay mixer here.
The electrical note needs attention. BlueBird lists the motor as 120 V or 240 V, 1/2 HP, and states that the 120 V version is not compatible with GFCI. Many garages and basements have GFCI outlets by code, so the 120 V model may need a separate circuit. BlueBird does not list amps or plug type on the product page; ask before ordering and have a licensed electrician check or install the circuit.
- Batch: 125 lb wet; 10 to 20 minute mix
- Motor: 1/2 HP washdown-rated gear motor, 120 V or 240 V
- Electrical: 120 V not GFCI compatible; amps and plug not published
- Size and weight: 27 x 24 x 32 in; 175 lb
- Price band: about $5,500 to $6,500 in October 2026; BlueBird showed it sold out; check the live price
Pros
- All stainless
- Sealed lid
- Variable speed for slip
- Compact on casters
Cons
- Amps not published
- 120 V version not GFCI compatible
- Stock limited
Who should skip it: potters who want to tip clay out rather than dig it out of a fixed bucket.
BlueBird 24SD: best for 250 lb batches
The 24SD is the larger BlueBird and adds the feature smaller hoppers lack: the bucket dumps, so mixed clay tips out instead of being dug out by hand. BlueBird rates it for 250 lb wet batches with a 6 to 10 minute practical mixing time, which is faster per pound than the 12SD. It is all stainless with a powder-coated frame, a sealed lid to contain dust, washdown-rated parts, improved bearing seals, locking casters and variable speed for slips.
This is a 240 V machine. BlueBird lists a 1.5 HP motor for 240 V single phase or 208 to 230 V three phase. It does not publish amps or plug type on the product page. Overall size is 40 x 28 x 42.25 in and it weighs 400 lb, so plan floor space and a solid, level floor before it arrives by freight.
For a shared studio, community center or a potter selling at volume, the 24SD halves the number of batches compared with the 12SD. For a single potter, 250 lb at a time is more clay than most can wedge before it starts to dry.
- Batch: 250 lb wet; 6 to 10 minute mix
- Motor: 1.5 HP
- Electrical: 240 V single phase or 208 to 230 V three phase; amps and plug not published
- Size and weight: 40 x 28 x 42.25 in; 400 lb
- Price band: about $8,300 to $9,000 in October 2026; check the live price
Pros
- Dumping bucket
- Fast mixing
- All stainless
- Sealed lid
Cons
- Needs 240 V
- Amps not published
- Large footprint
Who should skip it: home potters without 240 V service near the studio, or anyone mixing less than 250 lb at a time.
Soldner Professional Clay Mixer: best for schools and community studios
The Soldner Professional is the big version of the Studio model. New Mexico Clay lists about a 300 lb wet batch, a 5 HP motor, a 30 in diameter concrete tub 17 in high and a welded steel frame 43 in high, 44 in wide and 50 in long. Crated, it weighs 850 lb. The design is the same as the Studio: stationary 1 in stainless bars work against a slowly turning tub, with no sharp blades or augers, plus guards and an open-lid shutoff.
The electrical demand is the main difference. New Mexico Clay quotes full-load amps of 27 A at 208 V single phase, 19.1 A at 240 V single phase, 15 A at 208 V three phase, 13.2 A at 240 V three phase and 6.6 A at 460 V three phase. There is no 120 V version. Schools often have three phase service, which brings the amp draw down. Have a licensed electrician check or install the circuit.
Warranty matches the Studio: 5 years on the tub and 1 year on electrical. New Mexico Clay sells it as a special order with a phone quote that includes delivery.
- Batch: about 300 lb wet
- Motor: 5 HP
- Electrical: 19.1 A at 240 V single phase; 27 A at 208 V single phase; three phase options (New Mexico Clay)
- Size and weight: 43 x 44 x 50 in frame; 850 lb crated
- Price band: about $11,500 to $12,500 in October 2026; check the live price
Pros
- Largest batch here
- Blade-free design
- Three phase options lower amp draw
Cons
- No 120 V
- 850 lb
- Special order
Who should skip it: any home studio; this is classroom and community studio equipment.
Lehman Mity Mite Elite: best for slip and wet reclaim
Many hobby potters searching for a clay mixer really want a way to turn a bucket of trimmings and slop back into usable clay. Lehman’s Mity Mite Elite does the first half of that job. Clay-King lists it as a 10 gallon polyethylene tank with half-gallon markings, a 1/2 HP motor, a stainless steel shaft with one 4 in propeller, a lid that rotates closed to seal the tank, a 3/4 in faucet and an 8 ft inline on/off cord.
It mixes slip, porcelain and stoneware slurries, glaze and other heavy liquids, and reclaims wet trimmings. It does not mix stiff, plastic clay. After mixing, you pour the slurry onto plaster or into cloth bags to dry back to a throwing consistency. That is slower than a Soldner or BlueBird, but the machine costs a fraction of theirs. Lehman’s smaller BR6 slip and glaze mixer uses a 1/2 HP motor over a 6 gallon bucket if you need less capacity.
The dealer listings we read do not publish volts, amps, size or weight for either Lehman model, so confirm those before ordering. Both ship from the maker in about 3 to 6 weeks.
- Tank: 10 gallon polyethylene
- Motor: 1/2 HP; 8 ft cord with inline switch
- Mixer: stainless shaft, one 4 in propeller
- Electrical: volts and amps not published in listings read
- Price band: about $1,000 to $1,100 in October 2026 (BR6 about $700 to $750); check the live price
Pros
- Far lower cost
- Handles slip, glaze and reclaim slurry
- Faucet for pouring
Cons
- Does not mix plastic clay
- Slurry still needs drying
- Electrical specs not published
Who should skip it: potters who want throwing-ready clay out of the machine.
Pugmill-mixers: Peter Pugger PM-50 and Shimpo NVS-07
A pugmill-mixer mixes clay in a chamber and then extrudes it through an auger, so it replaces both a mixer and a pug mill. Peter Pugger says the PM-50 Pugger-Mixer takes up to 140 lb of moist clay, mixes at 500 lb per hour and pugs at 1,500 lb per hour, and can mix moist clay from dry powder and water or reclaim unfired scrap wet or dry. It does not de-air.
Peter Pugger lists 2 HP, single phase, 16 A at 240 V; Krueger’s listing says 8 A at 240 V, so plan for the maker’s higher figure. It weighs 400 lb crated and costs about $7,400 to $7,600 at Krueger in October 2026; check the live price. The Shimpo NVS-07 is the de-airing alternative: a 1 HP, 115 V machine with a 45 lb batch, with amps not published by Shimpo.
We keep these brief here because our pug mill guide covers them, along with de-airing and trapped clay, in full.
- PM-50 batch: 140 lb moist; 500 lb/hr mixing; 1,500 lb/hr pugging
- PM-50 electrical: 2 HP, 1 phase, 16 A at 240 V (maker); plug not published
- PM-50 size: 30 x 20 x 46 in; 400 lb crated; non de-airing
- NVS-07: 1 HP, 115 V, 45 lb batch, de-airing; amps not published
Pros
- Mixes and pugs in one machine
- Mixes from powder
- Fast output
Cons
- PM-50 needs 240 V and does not de-air
- Dealers disagree on amps
Who should skip it: potters who already own a pug mill, or who only reclaim slop.
Do you need a clay mixer?
Most home potters do not. A clay mixer earns its place when you mix your own clay bodies from powder, reclaim large amounts of scrap, or run a studio where many people use clay. A solo hobby potter using a 50 lb box a month spends less time and money buying moist clay and reclaiming by hand.
The no-machine routes are simple. Let scraps dry fully, slake them in water, pour the slurry onto a plaster slab, and wedge it when it reaches throwing consistency. A clay sink trap keeps slurry out of your drains. If you want to mix from powder in small amounts, our clay powder guide covers water ratios, and making clay at home covers wild clay. For wedging reclaimed clay, see how to wedge clay.
Electrical: volts, amps, plug and the circuit
Every mixer here draws enough current that it should not share a circuit with a kiln, a wheel or shop lights. Use the maker’s motor plate and manual figures, not a listing title. Published figures for these machines range from 1/2 HP at 120 V up to 5 HP at 208 to 460 V, and several makers do not publish amps or plug type at all.
- Single or three phase: homes have single phase service; many schools have three phase. Order the motor that matches your building.
- 120 V models: the Soldner Studio and BlueBird 12SD come in 120 V. BlueBird states its 120 V version is not GFCI compatible, and Clay-King recommends a dedicated circuit for the Soldner Studio.
- 240 V models: the BlueBird 24SD, Soldner Professional and Peter Pugger PM-50 need 240 V (or 208 V and three phase options).
- Plug type: not published for any mixer here. Ask the dealer what cord and plug ship on the machine.
Have a licensed electrician check or install the circuit for any clay mixer, using the volts, amps and phase on the maker’s motor plate. Do not wire a mixer yourself, change its plug, or run it on an extension cord. For repairs or motor work, follow the maker’s manual or call a qualified technician.
Silica dust safety when mixing dry clay
Dry clay powder contains crystalline silica, and the moment you tip a bag into a mixer is when the most dust gets into the air. Ceramic Arts Network notes that a respirator is still needed when handling dry materials, even with a tight-fitting hopper lid. A sealed lid, like the ones on the BlueBird mixers, reduces dust once mixing starts, but not while loading.
- Wear a NIOSH-approved respirator rated for fine dust whenever you open, pour or measure dry clay, and make sure it fits.
- Add water to the mixer first where the maker allows it, and pour powder slowly and low.
- Mix in a ventilated space with doors to living areas closed, and keep children and pets out.
- Clean up wet: sponge surfaces, wet-mop floors, and never dry sweep or use compressed air. A HEPA vacuum is the alternative for dry spills.
- Read the safety data sheet (SDS) for each clay and additive you mix.
Our clay dust safety guide covers studio cleaning and respirators in more depth. Mixers also have high torque: keep hands out of the tub or hopper while it runs, and never defeat a lid switch or guard.
How to choose a clay mixer
Batch size and throughput
Makers rate mixers by batch weight and sometimes by mixing time or pounds per hour. Pick a batch you can wedge or pug before it dries: 125 to 150 lb suits one busy potter or a small group; 250 to 300 lb suits classrooms.
Vertical tub or horizontal hopper
Soldner tubs turn slowly with stationary bars and no blades, and the clay is dug out from the top. Hopper mixers like BlueBird’s are more compact and sealed; the 24SD dumps its bucket for easy unloading.
Wet reclaim, dry powder or slip
Ask the dealer what state of clay the machine accepts: bone dry scrap, soft slop, powder or slip. Slip mixers handle liquids only. Variable speed on the BlueBirds helps with slip.
Stainless or painted steel
Stainless buckets and augers do not rust into light clay bodies. That matters most for porcelain and white stoneware. Concrete Soldner tubs are durable but heavy.
Space, weight and freight
Plan for 175 to 850 lb on a level, solid floor, freight delivery by truck and room to load from above. Casters help in a shared space. Our home pottery studio guide covers layout.
Cleaning between clay bodies
Clean the tub or bucket fully when switching from dark to light clay. Check how easily the lid, bars or auger come off before you buy, and whether the machine can be sealed to keep leftover clay moist.
Safety guards and lid switches
Look for an open-lid shutoff (Soldner) or a lid safety switch (BlueBird), guards over chains and gears, and an easy-to-reach stop switch.
Sources: BlueBird Clay mixers page and 12SD and 24SD product pages; New Mexico Clay Soldner Studio and Soldner Professional listings; Clay-King Soldner Studio C-119-210 listing; The Ceramic Shop Soldner Clay Studio MXR41 listing and mixers category; Clay-King Lehman Mity Mite Elite and Lehman BR6 listings; Peter Pugger PM-50 product page; Krueger Pottery Supply PM-50 listing; Shimpo NVS-07 page (via our pug mill guide); Ceramic Arts Network "Six Key Considerations When Shopping for Clay Mixers and Pugmills" and "All Mixed Up" guide. Specs checked October 2026.