Guide

Wax Resist for Pottery: Products, Application, Cleanup and Mistakes

Quick answer

Wax resist in pottery is a water-based wax emulsion you brush onto bisque or greenware so glaze, slip or underglaze will not stick there. It keeps glaze off feet and lids, and it masks patterns for decoration. Let it dry, glaze over it, sponge any beads off the wax, and the wax burns away in the kiln. Common choices are Mayco AC-302, AMACO Wax Resist and Aftosa green or black wax.

On this page
  1. What wax resist does
  2. Wax resist products compared
  3. How to apply wax resist
  4. Drying, firing and burn off
  5. Cleanup: brushes, spills and mistakes
  6. Common wax resist mistakes
  7. Safety notes
  8. What you need
  9. Frequently asked questions

What wax resist does

Wax resist is the simplest way to keep glaze where you want it. Mayco describes its AC-302 as a water-based coating that repels glaze, which dissipates in the kiln and leaves the surface as it was before firing. AMACO calls its product a wax emulsion that resists glaze, slip and underglaze on greenware or bisque.

Potters use it for two jobs. The everyday job is waxing the foot and any surface that touches the kiln shelf or a lid, so glaze cannot fuse the pot to the shelf. The creative job is painting lines, dots and shapes in wax so a glaze or underglaze breaks around them, a technique Mayco calls batik when wax is layered between coats of color.

This guide is research-based: it draws on the makers' product pages and instructions, US dealer listings and published potter articles. We do not test products ourselves. Our how to glaze pottery guide covers where waxing fits in the full glazing order.

Wax resist products compared

All four products below are cold, water-based wax emulsions you brush straight from the jar. They differ in tint, sizes and advice on waxing over glaze.

ProductTintSizesUse on (per maker or dealer)Key notePrice
Mayco AC-302 Wax ResistNot tinted2 oz squeeze bottle, pint, gallonGreenware, bisque, over unfired colorOne heavy coat; second coat will not adhereCheck price
AMACO Wax ResistNot tintedPint, gallonGreenware or bisque; resists glaze, slip, underglazeMay peel dipping glazes or glazes without gumCheck price
Aftosa Green Wax ResistGreen, fires clear4 oz, quart (dealers)Bases, rims, brushed or trailed designsNeeds red heat to burn offCheck price
Aftosa Black Wax ResistBlack, leaves a fired line4 oz, pint (dealers)Decorative lines, cone 06 to 8Line fades at higher conesCheck price

Price bands at US dealers in November 2026: Mayco AC-302 about $4 to $6 for 2 oz and $12 to $15 a pint; AMACO about $20 to $30 a pint and $100 to $120 a gallon; Aftosa Green about $4 to $5 for 4 oz and $30 to $40 a quart; Aftosa Black about $8 to $10 for 4 oz and $28 to $32 a pint. Check the live price.

Mayco AC-302 Wax Resist

Best small bottleMayco AC-302 Wax Resist
Key specs Water-based wax resist; 2 oz, pint, gallon

Mayco says AC-302 can go on unglazed greenware or bisque, or over previously applied, unfired color. Its instructions ask for one heavy coat, because even a thin coat repels color and a second coat will not stick to the first. Once on, it can only be removed by firing. The 2 oz squeeze bottle is the easy size for waxing a few feet at home.

Who should skip it: Studios that wax dozens of pots a week, who save with a gallon of any brand.

AMACO Wax Resist

For slip and underglaze tooAMACO Wax Resist (wax emulsion)
Key specs Wax emulsion; pint or gallon

AMACO's wax emulsion resists glaze, slip and underglaze on greenware or bisque, and AMACO labels it non toxic. AMACO also gives the clearest warning in this category: used over dipping glazes, or over glazes without gum added, its wax may peel the glaze off the ware. AMACO points to its Gum Solution for reviving old glazes. It comes in pints and gallons, with no small bottle.

Who should skip it: Potters who mostly wax over unfired dipping glaze, unless they test first.

Aftosa Green Wax Resist

Easy to seeAftosa Green Wax Resist (water-based, fires clear)
Key specs Green-tinted wax emulsion; 4 oz and quart at dealers

Aftosa tints this wax green so you can see where it went, and it fires clear. We could not find an Aftosa maker page, so these details come from The Ceramic Shop and Sheffield Pottery listings. They say to brush it or trail it for designs, thin it to suit, let it dry 3 to 4 hours before glazing or a second coat, and fire to at least cone 017, red heat, for it to burn off.

Who should skip it: Anyone in a cold climate ordering in winter; dealers warn frozen wax turns lumpy and stops resisting.

Aftosa Black Wax Resist

Fired black lineAftosa Black Wax Resist (leaves a fired black line)
Key specs Black wax resist; 4 oz and pint at dealers; cone 06 to 8

Aftosa's black wax resists glaze like the others but leaves a black oxide line when fired, per The Ceramic Shop. The listing gives a working range of cone 06 to cone 8, says the black fades at higher temperatures and is gone around cone 10, and suggests a clear overglaze to darken a gray line. Because it leaves colorant behind, read the SDS and treat it as decoration.

Who should skip it: Cone 10 potters, and anyone who only wants to keep glaze off feet.

Latex and hot wax: the other resists

Latex resist dries to a rubbery film that you peel off before firing, so you can glaze over a design, lift the latex and glaze the bare area in a second color. Big Ceramic Store's tips say to apply one thick coat, lift it with a needle tool and wear a dust mask while peeling, since dry glaze comes off with it. Hot paraffin dipping gives a clean, level foot line, but it is a fire risk: keep the heat low, stop if it smokes and keep an extinguisher close. For a home studio, a cold emulsion is the safer default.

How to apply wax resist

  1. Start with clean, dust-free bisque or greenware. Wipe bisque with a barely damp sponge if it is dusty, and let it dry.
  2. Pour a small amount of wax into a cup. Aftosa's dealers say never to pour used wax back into the jar, because glaze and clay contaminate it.
  3. Coat your brush in liquid dish soap and wipe off the excess. Mayco's own lava lamp tile project does this with a liner brush, and Aftosa's dealers recommend it too.
  4. Brush one even, heavy coat where glaze must not go. For a foot, cover the bottom and the lowest part of the foot ring; for a lidded jar, the gallery and the lid flange.
  5. Let the wax dry fully before glazing. Aftosa's listings give 2 hours minimum on one page and 3 to 4 hours on others; Mayco gives no time, only "dry."
  6. Dip, pour or brush your glaze. It will bead up on the wax.
  7. Wipe or pounce the beads off the wax with a clean, damp sponge. Mayco warns that any color left on the wax will stick to the fired surface.
  8. Load with a little extra space around waxed pieces, and fire to the glaze's cone.

Keep a cheap brush just for wax and mark its handle. Wax traces in a glaze brush will spoil your next glaze job.

Decorative wax resist: lines, patterns and layered glaze

For patterns, paint wax with a liner or round brush, or load it into a slip trailer for raised lines and dots (see slip trailing for the tool). Wax bare bisque, glaze over it, and the clay shows through. For a layered look, brush a first glaze, let it dry, wax a design over it, then apply a second glaze. Mayco's lava lamp tile works this way: wax circles over dried layers of SC-77 Glo-Worm and SC-27 Sour Apple, then three coats of SC-76 Cara-bein Blue over the whole tile, fired to cone 06.

Before waxing over unfired glaze, read the label. Mayco says AC-302 can go over unfired color, while AMACO warns its wax may lift dipping glazes and glazes without gum. Test on a tile first. Mayco also says its wax tends to chip if you try to scratch through it, so it is a poor partner for sgraffito lines.

Wax resist with underglaze and slip

Wax works the same way over greenware or bisque before underglaze or slip: paint the wax, brush the color over it, and the waxed areas stay clean. Our underglaze techniques guide shows where wax fits among other methods, and mishima covers inlaid lines, which some potters combine with wax.

Drying, firing and burn off

Wax does its work during glazing only. Once the glaze is on, the wax has nothing more to do, and it burns away early in the firing. Aftosa's dealers say the kiln has to reach red heat, at least cone 017, for the wax to burn off; wax on raw greenware burns away in the bisque firing.

Burning wax smokes. Mayco tells potters to give the kiln extra ventilation early in the firing to clear those fumes, and to leave extra room when loading because repelled color can flake off and land on nearby pieces. A kiln vent or an open, well ventilated room helps; see our kiln vent guide. Mayco also notes wax only repels glaze while you apply it: a heavy, runny glaze can still flow over a waxed foot in the kiln, so leave a bare margin for glazes that move.

Cleanup: brushes, spills and mistakes

Clean brushes straight after use. Aftosa's dealers recommend warm, soapy water. Mayco says its wax needs no brush preconditioning, and if it dries in a brush, mineral spirits will remove it. (A dealer listing that reproduces Mayco's label text suggests conditioning the brush with Mayco's AC-525 Brush Cleaner, so the two Mayco sources differ; soap works either way.)

Wax in the wrong place is harder. Mayco says a coat can only be removed by firing. The fix is to fire the piece again as bisque, which Aftosa's dealers describe as re-firing at cone 06, then re-wax and glaze. Ceramic Arts Network's wax pattern article gives the same advice for a flawed waxing. Sponge glaze beads off waxed areas with a damp sponge rather than scraping them dry.

Storage and shelf life

Keep the lid tight. Dealers say Aftosa wax lasts 2 to 3 years, that a strong sour smell means it is contaminated, and that wax which freezes turns lumpy and will not resist properly. Store any wax indoors, away from frost.

Common wax resist mistakes

  • Glazing over wet wax. The glaze sticks where the wax has not set. Wait until it is dry.
  • Adding a second coat of Mayco wax. Mayco says it beads up and will not adhere to the first.
  • Leaving beads on the wax. Any glaze left on a waxed foot fires onto it and can stick to the shelf.
  • Waxing over dipping glaze without a test. AMACO warns the wax may peel the glaze off.
  • Returning wax to the jar. Pour out what you need and discard leftovers.
  • Waxing right to the edge of a runny glaze. Leave a wider bare band above the foot for glazes that move.
  • Firing a full load of waxed pots with no ventilation. Expect smoke early in the firing.

Safety notes

Wax resist itself is low risk, but the glaze you wipe off it is not. Glaze and clay dust contain silica, so wipe beads with a damp sponge, clean up wet and never sand or dry brush glaze off waxed areas. Wear a NIOSH-approved respirator when mixing dry glaze materials, and read the maker's SDS for each wax and glaze; see our clay dust safety guide. Hot paraffin is a fire risk and should not be heated on a kitchen stove you cook on.

Wax keeps glaze off the foot; it does not change whether a glaze is food safe. Follow each glaze's label, fire to the stated cone and test your own results before using a piece for food.

What you need

A bottle of water-based wax resist, a cheap brush kept for wax, a small cup, a damp sponge and dish soap cover most home glazing. For which brushes to buy and which to keep for wax, see our pottery brushes guide.

Sources: Mayco AC-302 Wax Resist product page and Mayco Wax Resist color page (application and helpful hints); Mayco projects Lava Lamp Technique Tile and Canvas Pouring with Wax Resist; AMACO Wax Resist product page; dealer listings for Aftosa Green and Black Wax Resist at The Ceramic Shop, Sheffield Pottery and Good Earth Clays; Creative Crafts Mayco AC-302 listing; The Ceramic Shop wax resist category; Big Ceramic Store resist tips (two pages); Ceramic Arts Network, "Wax Resist Patterns." Specs checked November 2026.

Frequently asked questions

What is the best wax resist for pottery?

It depends on the job. Mayco AC-302 comes in a 2 oz squeeze bottle that suits occasional waxing of feet, AMACO Wax Resist resists glaze, slip and underglaze in studio sizes, and Aftosa Green is tinted so you can see coverage. All are water-based emulsions, so test on your own glaze first.

How do you use wax resist in pottery?

Brush one even coat onto clean bisque or greenware where glaze must not go, let it dry fully, then apply glaze over it. Sponge any glaze beads off the wax before firing, and the wax burns away in the kiln.

What can I use instead of wax resist?

Latex resist, which you peel off before firing, works for masking designs. Tape and paper stencils can mask underglaze, and some potters simply sponge glaze off the foot instead of waxing. Hot paraffin also works but is a fire risk at home.

Can I make my own wax resist for pottery?

Some potters melt paraffin and dip pot feet in it, but hot wax can ignite, so keep the heat low, stop if it smokes and keep an extinguisher nearby. Homemade emulsions are not tested by any maker. A commercial water-based wax costs little per pot and avoids the heat.

Can you put wax resist over unfired glaze?

Mayco says AC-302 can go over previously applied, unfired color. AMACO warns its wax may peel dipping glazes or glazes without gum, so test on a tile before waxing over a glaze you care about.

How do you clean wax resist out of a brush?

Wash it straight away in warm, soapy water, and coat the brush in liquid soap before you start so the wax releases easily. Mayco says dried wax can be removed with mineral spirits.

How do you remove wax resist from the wrong spot?

Mayco says its wax can only be removed by firing. Fire the piece again as bisque to burn the wax off, then wax and glaze again.

How long does wax resist take to dry?

Aftosa’s dealer listings give 2 hours at least on one page and 3 to 4 hours on others before glazing. Mayco only says to let it dry, so wait until the surface no longer feels tacky.

Researched and written by Muhammad Mustafa

Muhammad Mustafa researches and writes Home Pottery HQ from maker spec sheets, manuals, dealer listings and published studio guidance. He does not claim hands-on testing of products he has not used, and every page names its sources.