Handmade pottery tools are wooden, bamboo and brass tools shaped in small workshops rather than stamped out in bulk. The best of them are designed by potters for one job, such as a bowl profile or a clean foot, and they feel better in a wet hand than plastic. This guide compares eight wooden pottery tools, from a $8 classic to heirloom knives, using maker pages and dealer listings. It is research-based; we did not use these tools ourselves.
Two other pages cover nearby ground. Our Garrity pottery tools review goes deep on that maker, and our pottery ribs guide explains how rib materials and flex compare. Here we focus on who makes good handmade tools and which pieces are worth buying.
Quick picks
- Best handmade set: Garrity Tools Starter Kit (five cherry and maple tools from St. Louis)
- Best small-batch profile rib: Stoic Clay Tools Bubble Profile Rib (cherry, made in Spartanburg, SC)
- Best exotic hardwood tool: Troy Bungart Studios Ipe Trim Tool with Chisel Tip (9.25 in)
- Best heirloom tool: Hand + Fire Potter's Knife (salvaged Oregon hardwood)
- Best handmade foot rib: Dirty Girls Foot Fetish Rib (wood, sold by Kentucky Mudworks)
- Best wooden texture tool: MKM Hand Roller (carved in Wisconsin, tung oil finish)
- Best budget wooden tool: Kemper WT6 8 in wood modeling tool
- Best bamboo set: Bamboo Tools 8 Piece Pottery Toolkit (PTK012)
Handmade and wooden pottery tools compared
| Tool | Maker and place | Wood | Size (maker) | Best job | Typical price band | Buy |
|---|---|---|---|---|---|---|
| Garrity Starter Kit | Garrity, St. Louis, MO | Cherry and maple | 5 tools; T1 is 8.75 x 1.5 in | Everyday wheel shaping | Within Garrity's $24 to $92 kit range | Check price |
| Stoic Bubble Profile Rib | Stoic, Spartanburg, SC | Cherry | 3 x 1.75 to 5.5 x 2.75 in | Bubble wall profiles | $10 to $20 | Check price |
| Troy Bungart Ipe Trim Tool | Troy Bungart Studios | Ipe | About 9.25 x 2.25 in | Trimming, cutting, cleanup | $20 to $25 | Check price |
| Hand + Fire Potter's Knife | Hand + Fire (Sage Cortez) | Salvaged Oregon hardwood | 7 x 0.75 x 0.25 in | Cutting, trimming, carving | $28 to $35 | Check price |
| Dirty Girls Foot Fetish | Dirty Girls / Kentucky Mudworks | Wood | Not published | Shaping the foot | $9 to $15 | Check price |
| MKM Hand Roller | MKM, Appleton, WI | Recycled fine-grain wood, tung oil | 10 cm wide | Texture on slabs and pots | $15 to $20 | Check price |
| Kemper WT6 | Kemper Tools | Hardwood | About 8 in | Smoothing, cutting, modeling | $7 to $9 | Check price |
| Bamboo Tools 8 Piece Kit | Bamboo Tools (Canada-based) | Bamboo, wood and steel | 8 pieces | Starter set | $30 to $35 | Check price |
Price bands are maker and US dealer prices seen in October 2026. Small makers sell mostly from their own stores, so the Amazon button may show a search. Check the live price before you buy.
1. Garrity Tools Starter Kit: best handmade set
Garrity is the best-known name in handmade pottery tools, and its kit is the easiest way to try them. Garrity Tools is a worker-owned cooperative in St. Louis, Missouri, and the Starter Kit bundles five of its everyday shapes: the T1 knife (maple, 8.75 x 1.5 in), the S2 and K1 (cherry), the N3 (maple) and the I1 (cherry). Garrity says the kit costs $8 less than the five tools bought separately.
What sets Garrity apart is that it publishes the wood and size of almost every tool, which few small makers do. The kit does not include a wire, sponge or trimming tool, so it adds to a basic kit rather than replacing one. We cover the full range, the profile and foot tools, and care in our Garrity review, so we keep this short.
- Tools: T1, S2, N3, K1, I1
- Wood: cherry and maple (per tool, from Garrity)
- Made in: St. Louis, Missouri
Pros
- Five shapes from one of the best-documented small makers
- Wood and size published
- Saves a little over single tools
Cons
- No cutting or trimming steel
- Costs more than a factory wood set
Who should skip it: potters who already own a kidney rib and a wood knife; one Garrity profile or foot tool adds more.
2. Stoic Clay Tools Bubble Profile Rib: best small-batch profile rib
Stoic Clay Tools is a two-person workshop run by Brett and Rachel, and every tool is made in Spartanburg, South Carolina, in small batches. The wooden ribs are cherry hardwood, hand finished with what Stoic calls a natural mixture of wax and oil. The range leans toward profile ribs: tools cut to a shape you press against a spinning wall so every pot comes out with the same curve.
The Bubble Profile Rib is a good example. It comes in three sizes: small 3 x 1.75 in for short planters and small bowls, medium 4 x 2.15 in for everyday cups, and large 5.5 x 2.75 in for tall vases and big cups. One side has straight curves for upright stacked bubbles; flip it and the other side gives a softer, tilted look. Stoic calls it beginner-friendly, and a profile rib is one of the few tools that gives a new thrower a crisp, repeatable shape.
The catch is stock. When we checked in October 2026, all three sizes and the set were sold out, as were most of Stoic's ribs; a few, such as the Claw, Tooth and Rounded Rectangle ribs, showed options to choose. Small-batch makers restock in runs, so sign up for alerts if you want one before the holidays.
- Sizes: small 3 x 1.75 in; medium 4 x 2.15 in; large 5.5 x 2.75 in; set of 3
- Wood: cherry hardwood
- Finish: wax and oil
- Made in: Spartanburg, South Carolina
Pros
- Repeatable bubble profile
- Two looks in one rib
- Three sizes
Cons
- Sold out when we checked
- A single-purpose shape
Who should skip it: potters who prefer to shape walls freehand, or who need a tool this month.
3. Troy Bungart Studios Ipe Trim Tool: best exotic hardwood tool
Troy Bungart's tools stand out for their woods. His shop lists ribs, knives and throwing sticks in ipe, padauk, purpleheart and osage, plus resin-impregnated and dyed Baltic birch composites, and says each is handmade by Troy Bungart. Ipe is a very dense tropical hardwood, which suits a tool that cuts and scrapes clay all day.
The Ipe Trim Tool with Chisel Tip is about 9.25 x 2.25 in, with two tapered cutting edges, one straight and one pointed. The maker says it is wider than many clay knives, which gives you a flat face for cleaning up a base and a point for detail. One oddity: the listing's web address refers to padauk while the title says ipe, so confirm the wood if it matters to you. It was in stock when we checked.
The shop also sells left-handed and right-handed throwing sticks (about 10.5 x 2 in) and rat-tail sticks for narrow forms, one of the few handmade sources that offers a left-handed choice.
- Size: about 9.25 x 2.25 in
- Wood: ipe (title; listing address says padauk)
- Edges: one straight, one pointed, both tapered
- Finish: not published by the maker
Pros
- Dense hardwood
- Wide face plus a point
- In stock
- Left-hand sticks in the same shop
Cons
- Wood naming inconsistent on one listing
- No care or finish details published
Who should skip it: potters who need published specs for every tool; Garrity documents more.
4. Hand + Fire Potter's Knife: best heirloom tool
Hand + Fire is the high end of handmade pottery tools. Each tool is made by artist Sage Cortez, and the maker says all its wooden tools come from fallen or salvaged Oregon hardwood. The range adds hand-hammered brass blades, brass ribs and hemp cord wire cutters, and runs from about $21 sculpting tools up to wooden mallets and throwing gauges priced in the hundreds.
The Potter's Knife is the sensible entry point: 7 in long, 0.75 in wide and 0.25 in thick, for cutting, trimming and carving. A Brass-Grip version adds a brass handle insert. If you want a rib instead, the Classic Wooden Rib is 4 x 2 in and about 0.5 in thick, shown in raw black walnut.
Hand + Fire publishes clear care rules: take tools out of the water bucket after use, rinse, air dry, and every three months or so sand lightly (120 grit or finer) and oil with food-safe walnut oil or beeswax board butter. It explains that torched wood is sealed against swelling while raw wood is meant to get wet but needs more oiling.
- Size: 7 x 0.75 x 0.25 in
- Wood: salvaged or fallen Oregon hardwood (species varies)
- Variants: Brass-Grip Potter's Knife
- Care: air dry; sand and oil about every three months
Pros
- Salvaged wood
- Detailed care guidance
- A tool that makes a lasting gift
Cons
- Three to four times the price of a factory knife
- Species not fixed per tool
Who should skip it: beginners still learning what shapes they like; buy a $10 tool first and upgrade the one you reach for most.
5. Dirty Girls Foot Fetish Rib: best handmade foot rib
Dirty Girls makes plain working tools with playful names, and the wood ribs are its handmade core. Its site says it partners with a local machine shop and finishes everything in-house; US dealer Krueger Pottery says the tools are made in Kentucky by Kentucky Mudworks, and Clay-King calls the trim tools handmade in Kentucky.
The Foot Fetish is a wood rib shaped to form the base and foot of a pot as you throw, so less clay comes off at trimming. Dirty Girls also makes the Big Foot Fetish, Lip Service, Bean and Tongue ribs and a set of wooden paddles from 10 x 2 in to 12.5 x 2 in. The maker does not publish the rib's size, which is the main gap. More on the line is in our Dirty Girls review.
- Type: wood foot rib
- Size: not published by the maker
- Made in: Kentucky, per dealers
Pros
- Forms a foot during throwing
- Low price for a handmade rib
- Widely stocked by US dealers
Cons
- Size not published
- Product names differ between dealers
Who should skip it: hand-builders and anyone who trims every foot anyway.
6. MKM Hand Roller: best wooden texture tool
Not every wooden pottery tool shapes walls. MKM Pottery Tools, founded in 2003 by potter Rick McKinney in Appleton, Wisconsin, carves its stamps and rollers in its own factory from fine-grained recycled wood from the furniture industry, finished with pure tung oil. MKM bevels every cut line, which it says helps clay release cleanly, and cuts with blades rather than lasers.
The 10 cm Hand Roller is the size most people start with: wide enough to texture a mug wall or a slab in one pass. MKM also makes 7.5 cm, 12 cm and 20 cm rollers, narrow handle rollers and hundreds of stamp designs. Our texture rollers guide compares MKM with other roller makers, and the MKM review covers the whole range.
- Width: 10 cm (3.9 in); other widths 7.5, 12 and 20 cm
- Wood: recycled fine-grained furniture wood, tung oil
- Made in: Appleton, Wisconsin
Pros
- Carved in the US
- Beveled lines release cleanly
- Huge design choice
Cons
- Decoration only
- Deep designs need firm, even pressure
Who should skip it: potters who glaze heavily over plain surfaces and never add texture.
7. Kemper WT6 Wood Modeling Tool: best budget wooden tool
The Kemper WT6 is the wooden tool in nearly every class kit, and the honest budget choice. It is not handmade in the small-workshop sense: Kemper is a long-running US tool company, founded in 1947, selling the same shapes year after year. Seattle Pottery Supply lists them as imported hardwood, made in the USA, with a satin-smooth finish, for cutting, slicing, smoothing, contouring and pattern decorating in soft clay.
The 8 in line comes in ten shapes (WT2, WT4, WT6, WT12, WT16, WT18, WT20, WT22, WT26 and WT28), and the WT6 is the one in the Kemper PTK kit. Kemper also makes 6 in tools, including a WT15 boxwood set aimed at students. At under $10 each, these are the way to learn which shapes you use before you spend $20 to $30 on a handmade version. Our Kemper review lists the rest of the range.
- Length: about 8 in
- Wood: imported hardwood, made in the USA (Seattle Pottery Supply)
- Finish: satin smooth
- Other shapes: nine more 8 in tools; 6 in tools
Pros
- Very cheap
- Ten shapes to try
- Easy to replace
Cons
- Factory-made, not handmade
- Plain finish wears faster than an oiled tool
Who should skip it: anyone buying a gift; it reads as a class kit tool, not a handmade one.
8. Bamboo Tools 8 Piece Pottery Toolkit: best bamboo set
Bamboo is the alternative to hardwood. Bamboo Tools argues that it holds an edge better than most woods, resists water far better, and needs no oil because it does not go soft, crack or warp when soaked. Those are the maker's claims, but they explain why bamboo throwing tools are common in Asia.
The 8 Piece Pottery Toolkit (PTK012) covers throwing and hand-building: a metal rib, a wood rib, a 3 in ultra-dense black sponge, a wiggle wire, a wood knife, a double-sided steel kanna trimming tool, a wood carving tool and a double-sided pin tool. The kanna is the interesting part; it is a Japanese-style open trimming blade most Western kits do not include. Bamboo Tools does not publish sizes for the pieces or where they are made. For more bamboo throwing tools, see our Japanese pottery tools guide.
- Pieces: metal rib, wood rib, sponge, wiggle wire, wood knife, steel kanna, wood carving tool, pin tool
- SKU: PTK012
- Origin: not published by the maker (Canada-based seller)
Pros
- Complete starter set with a kanna
- Bamboo and steel handle water well
Cons
- Piece sizes not published
- Not handmade by a named craftsperson
Who should skip it: potters who already own a basic kit and only want one special piece.
How to choose handmade pottery tools
A handmade tool costs two to four times what a factory one does. It earns that when it does a job better, feels better for hours at the wheel, or lasts for years. Check these points before you buy.
Handmade versus factory-made
"Handmade" on a listing can mean a named person shaping each tool (Troy Bungart, Hand + Fire), a small workshop making batches (Garrity, Stoic, Dirty Girls, MKM), or simply a wooden tool. Factory tools like Kemper's are consistent and cheap. Small-maker tools usually bring better shapes, smoother edges and a finish that is oiled or waxed rather than bare. Look for a named maker and place; if a listing has neither, treat "handmade" as a style word.
Wood species
Makers use dense, close-grained woods that do not splinter in water. Garrity uses cherry, maple and walnut; Stoic uses cherry; Troy Bungart uses ipe, padauk, purpleheart and osage; Hand + Fire uses salvaged Oregon hardwood; Kemper's student 6 in set is boxwood. Composite woods such as resin-impregnated Baltic birch resist water better than plain wood but are not solid timber. Bamboo is a grass, not a wood, and Bamboo Tools says it needs no oiling.
Finish
Oil and wax finishes (Stoic, Garrity, MKM's tung oil) repel water and are easy to renew. Torched wood, which Hand + Fire offers, is sealed against swelling. Raw wood is meant to get wet but needs more frequent oiling. A satin factory finish wears off fastest. Whatever the finish, never leave wooden tools soaking in the water bucket; that is the usual reason they crack or warp.
Which tools to buy first
- Wheel throwers: one kidney or general rib and a wood knife, then a profile or foot rib for the forms you repeat.
- Hand-builders: a wood knife, a modeling tool and a paddle; our hand-building tools guide covers the rest.
- Decorators: a wooden roller or stamp set.
If you are not sure which shapes you use, buy two or three $8 Kemper tools first, then replace your favorite with a handmade version.
Left-handed potters
Flat ribs and knives work for either hand. Throwing sticks and some profile ribs are handed. Troy Bungart sells left-handed and right-handed throwing sticks, and Bamboo Tools says it offers mirrored shapes on some tools. Ask a small maker before ordering; many will cut a mirrored version.
Price, stock and gifts
Most handmade ribs and knives cost $10 to $35, and a few heirloom pieces run far higher. Small makers sell out: in October 2026 most of Stoic's ribs were sold out, while Garrity had nearly its whole range in stock. If you are buying for the holidays, order early and check each maker's shipping dates. A single handmade tool in a tool roll makes a good gift for a potter; our gifts for potters guide has more ideas.
Care and dust
Rinse, wipe and air dry wooden tools after each session, and re-oil them when they look dry. Clean your bench and tools while the clay is still damp; dried clay residue turns to dust that contains silica, so wet-wipe surfaces instead of brushing them off.
Sources: Garrity Tools Starter Kit and product pages (from our Garrity review); Stoic Clay Tools home page, Wood Ribs and Tools collection, Bubble Profile Rib, Half Circle Rib and Claw Rib pages; Troy Bungart Studios pottery tools page, Ipe Trim Tool with Chisel Tip and Left or Right Handed Throwing Stick pages; Hand + Fire pottery tools product list and care notes; Dirty Girls site with Krueger Pottery and Clay-King listings (from our Dirty Girls review); MKM Pottery Tools About and Rollers4Clay pages (from our MKM review); Seattle Pottery Supply Kemper 8 in Wood Tools listing; MICA store Kemper WT15 listing; Bambootools 8 Piece Pottery Toolkit page and bamboo article; Kentucky Mudworks wooden tools page. Research-based comparison, no hands-on testing. Specs checked October 2026.