Review

Mayco Speckled Glaze Guide: Speckled Stroke & Coat, Speckled Toad and Mayco White Glazes

Verdict in brief

The main Mayco speckled glaze line is Speckled Stroke & Coat: Stroke & Coat colors with small contrasting specks, made for cone 06/05, labeled Dinnerware Safe and opaque in two to three coats. For cone 6, Mayco's Stoneware line adds Speckled Toad and newer Speck colors, and pale crystal and matte whites such as Sandstone, Sea Salt and Alabaster give a speckled look on stoneware.

On this page
  1. Verdict
  2. The glazes at a glance
  3. Mayco Speckled Stroke & Coat
  4. Mayco Speckled Toad (SW-184)
  5. Mayco Sandstone (SW-176)
  6. Mayco Sea Salt (SW-118)
  7. Mayco Alabaster (SW-106)
  8. Mayco Abalone (SW-143)
  9. Mayco Frosted Lemon (SW-169)
  10. Mayco Oyster Shell (EL-101)
  11. Who should buy which
  12. Weak points
  13. Alternatives
  14. Safety notes
  15. Frequently asked questions

Verdict

If you fire low fire and want a Mayco speckled glaze with the stoneware look, Speckled Stroke & Coat is the simplest route: it brushes like regular Stroke & Coat, the specks do not melt at cone 06, and the line carries Mayco's Dinnerware Safe label. If you fire at cone 6, the better picks are Stoneware glazes. Speckled Toad has true dark specks, while Sandstone and Sea Salt get their spots from crystals that bloom in the firing.

This page covers Mayco's speckled glazes and the pale, white and neutral glazes potters pair with them. It is research-based: we compared Mayco's line pages, product pages, kit page and 2026 Color Guide, and dealer listings for price. We did not fire these glazes. If what you want is speckles in the clay itself, see speckled clay; a speckled body under a clear or pale glaze gives a different look.

The glazes at a glance

GlazeCode and lineCone (Mayco)FinishCoatsFood label (Mayco)Light vs dark clay (Mayco)
Speckled Stroke & CoatSP seriesMatures 06/05; many colors to 10Gloss without clear2 to 3 for opacityDinnerware SafeDark or speckled clay can shift color
Speckled ToadSW-184, Stoneware6 ox, 10 redShimmery green, dark gray specks3 shown at 10Dinnerware SafeTiles on speckled white, speckled brown, dark clay
SandstoneSW-176, Stoneware crystal6, 10Matte off-white at 6No count; 3 shownDinnerware SafeTiles on speckled white, speckled brown, dark clay
Sea SaltSW-118, Stoneware crystal6, 10Matte white, sage green crystalsNo countDinnerware SafeNot published
AlabasterSW-106, Stoneware6, 10Soft matte white1 to 4 shownDinnerware SafeClay body shows through
AbaloneSW-143, Stoneware6 ox, 10 redSemi-gloss white and mauve3+ for semi-glossDinnerware SafeClay body shows through
Frosted LemonSW-169, Stoneware6, 10Semi-opaque gloss yellow1 to 3 shownDinnerware SafeTiles on speckled white, speckled brown, dark clay
Oyster ShellEL-101, Elements06 (changes at 6)Glossy pale graySemi-transparent at 3Dinnerware SafeNot published

Price band: Stoneware pints typically run about $13 to $18 at US dealers in November 2026, Speckled Stroke & Coat about $4 to $7 for 2 oz, and Elements about $5 to $17 by jar size. Check the live price.

Mayco Speckled Stroke & Coat

Best way to try speckled glazeMayco Speckled Stroke & Coat Kit #2 SP-KIT2, 12 x 2 oz
Key specs 12 x 2 oz; matures cone 06/05; Dinnerware Safe; specks do not melt at cone 06
Mid-range tierCheck price on Amazon

Mayco describes Speckled Stroke & Coat as Stroke & Coat colors with small specks of a contrasting hue. It is the same heavily pigmented, viscous glaze for brushwork or opaque coverage, and the liquid color matches the fired color. The line matures at cone 06/05. Our Stroke and Coat review covers the base line; this section is about what the specks change.

Coats and finish: one coat is translucent, and Mayco suggests two to three coats for full opacity, drying between coats. It fires glossy without a clear. A single coat over a matte glaze fires matte, while two to three coats fire glossy. Mayco notes SP-270 Speckled Pink-A-Dot is more translucent and may need more than three coats.

What happens to the specks: Mayco's kit page says the speckles do not melt or flow at cone 06. At cone 5/6 and above they may blur and tend to melt and flow slightly on vertical surfaces, and lighter specks tend to fade or burn out. Most colors hold at higher cones, especially reds, oranges, yellows, greens and blues, while pinks and purples can shift or fade.

Light and dark clay: Mayco fires its chips on white earthenware at cone 06 and white stoneware at cone 6 and 10, and says darker or speckled clay bodies can shift the color. Test on your clay first.

Greenware or bisque: Mayco says you can apply it to wet or leather-hard clay, dry it and fire to cone 04, skipping the bisque. Leave an area such as the foot unglazed so gases can escape.

Labels: the line is certified AP (ACMI) and labeled Dinnerware Safe when fired per instructions, and Mayco says it complies with FDA guides CPG Sec. 545.400 and 545.450. All Speckled Stroke & Coat colors are luster compatible.

Clear glaze notes: Mayco says adding clear at cone 5 and higher can change color and blur designs, and that SP-213 Speckled Grapel can develop a milky haze with some clears.

Speckled colors and the kit

Mayco lists 23 colors in 2 oz, 8 oz and 16 oz squeeze bottles. The SP-KIT2 kit holds twelve 2 oz bottles: Speckled Cotton Tail, Sunkissed, My Blue Heaven, Blue Yonder, Moody Blue, Grapel, Pink-A-Dot, Hot Tamale, Sour Apple, Green Thumb, Vanilla Dip and Tuxedo. Mayco names SP-274 Hot Tamale and SP-288 Tu Tu Tango as reds that fire red up to cone 10. SP-212 Speckled Moody Blue is the speckled twin of the solid color on our Mayco blue and green glazes page.

  • Kit: SP-KIT2, 12 x 2 oz
  • Cone: matures 06/05; many colors usable to 10
  • Coats: 2 to 3 for opacity
  • Label: AP, Dinnerware Safe

Pros

  • Specks stay put at cone 06
  • No clear needed
  • Works on greenware

Cons

  • Specks blur and light specks fade at cone 6 and up
  • Some clears haze one color

Who should skip it: cone 6 potters who want specks that stay crisp.

Kit price band: about $45 to $60 at US sellers in November 2026; check the live price.

Mayco Speckled Toad (SW-184)

Best cone 6 speckled greenMayco Stoneware SW-184 Speckled Toad Glaze, Pint
Key specs Cone 6 ox and 10 red; shimmery green with dark gray specks; pint

Speckled Toad is the Stoneware answer to the speckled look. Mayco describes it as a shimmery green with dark gray specks that bloom when fired. At cone 6 oxidation it breaks to a semi-transparent olive green, and at cone 10 reduction it shifts to olive green and metallic gray that breaks blue.

Light and dark clay: chips are fired flat on a white body, with cone 6 tiles labeled speckled white, speckled brown and dark clay. Mayco's general Stoneware note applies: one coat lets the clay show through, two to three coats deepen the color.

Application and layering: no method is stated; the cone 10 tile uses three coats. Mayco shows it under SW-401 Light Flux and SW-402 Dark Flux at cone 10 reduction; those fluxes have their own page at Mayco flux glazes. No movement note is published. Pint only.

Pros

  • True specks at cone 6
  • Shimmer
  • Dinnerware mark

Cons

  • Pint only
  • Green palette only

Who should skip it: potters who want a white or neutral speckled glaze.

Mayco's newer Speck colors

Mayco's Stoneware line also has a Speck series. SW-230 Pink Speck and SW-232 Baby Blue Speck are satin-matte, semi-opaque glazes with small purple, orange and yellow specks that break over texture. Mayco recommends cone 6 for the best satin matte, says the specks blur at cone 10 as the coat gets thicker, and says to stir or shake before every use because the specks settle. Both show the Dinnerware Safe icon and come as a pint or 10 lb dry. The 2026 Color Guide also lists SW-231 Lilac Speck and SW-113 Speckled Plum.

Mayco Sandstone (SW-176)

Best neutral crystalMayco Stoneware SW-176 Sandstone Crystal Glaze, Pint
Key specs Cone 6 and 10; matte off-white at 6; pint or 10 lb dry (SD-176)

Sandstone is a Stoneware crystal glaze. At cone 6 it fires a matte off-white, and thicker coats with heavy crystal produce more glossy blue and purple variation. At cone 10 the color darkens and the blue and purple become more prominent. Mayco adds that wood and soda results vary.

Light and dark clay: no written guidance; Mayco shows cone 6 tiles on speckled white, speckled brown and dark clay.

Application: brush, stir with a palette knife, and fan the crystals while wet. Keep crystals off the bottom third of vertical pieces, since they flow more than the base, and avoid heavy crystal buildup, which can pinhole or run. Store the jar upside down.

Layering: for a lighter crystal effect, Mayco suggests two coats of SW-172 Macadamia, then a third coat of Sandstone. It also shows Sandstone over SW-401 Light Flux and SW-402 Dark Flux at cone 10 reduction.

  • Code: SW-176 pint; SD-176 10 lb dry
  • Finish: matte off-white at 6; darker at 10
  • Label: Dinnerware Safe icon, ACMI seal

Pros

  • Soft neutral with color variation
  • Dry bag

Cons

  • Crystal handling
  • Look changes a lot with thickness

Who should skip it: potters who want a plain, even white.

Mayco Sea Salt (SW-118)

Foamy white crystalMayco Stoneware SW-118 Sea Salt Crystal Glaze, Pint
Key specs Cone 6 and 10; white matte with sage green crystals; pint or 10 lb dry (SD-118)

Sea Salt is a white matte crystal glaze with sage green crystals. As the crystals melt at cone 6, green blooms form, giving what Mayco calls "a foamy, textured fired finish." At cone 10 the base turns pale lavender or gray and the crystals turn mint green.

Base glaze and layering: Mayco names SW-106 Alabaster as the base. For a lighter crystal effect, apply two coats of Alabaster and a third of Sea Salt.

Application: the same crystal rules as Sandstone: mix well, re-stir between coats, fan the crystals, keep them off the bottom third, and store the jar upside down. Mayco publishes no clay body note for Sea Salt.

  • Code: SW-118 pint; SD-118 10 lb dry
  • Finish: matte, textured, with green blooms
  • Label: Dinnerware Safe

Pros

  • A speckled look on stoneware without a speckled clay
  • Named base glaze

Cons

  • Crystals can pinhole or run if heavy
  • No coat count

Who should skip it: anyone who wants a smooth surface.

Mayco Alabaster (SW-106)

Soft matte white baseMayco Stoneware SW-106 Alabaster Glaze, Pint
Key specs Cone 6 and 10; semi-opaque soft matte white; pint, gallon, 10 lb dry (SD-106)

Alabaster is "a semi-opaque white soft matte glaze that breaks over texture." At cone 10 it darkens to a varied light gray and purple. Mayco's tip says it looks like Sea Salt combinations without the crystals, which is why it is Sea Salt's base. The product page calls it soft matte in one place and satin in the tip, so expect a finish between the two.

Light and dark clay: Mayco says the semi-opaque white finish shows the clay body's characteristics, so a speckled or iron-rich body will read through it.

Layering: Mayco says it pairs well with two coats of Stroke & Coat on top, and shows it over and under SW-401 Light Flux and SW-402 Dark Flux.

  • Code: SW-106 pint and gallon; SD-106 10 lb dry
  • Coats shown: 1 to 4 at cones 5 and 6
  • Label: Dinnerware Safe

Pros

  • Shows clay speckles
  • Base for Sea Salt
  • Gallon size

Cons

  • Soft matte vs satin wording differs on Mayco's own page

Who should skip it: potters who want a bright, opaque white over dark clay.

Mayco Abalone (SW-143)

White and mauveMayco Stoneware SW-143 Abalone Glaze, Pint
Key specs Cone 6 ox and 10 red; semi-gloss white and mauve; pint or 10 lb dry (SD-143)

Mayco says Abalone is "formulated to produce a breaking white and mauve semi-gloss glaze" at cone 6. Light coats look whiter, and three or more coats are needed for the full semi-gloss. At cone 10 reduction it darkens to purple. Clay body characteristics show through, per Mayco. It is shown with SW-401 Light Flux and SW-402 Dark Flux. Sizes are SW-143 pint and SD-143 10 lb dry.

Pros

  • Soft pink-white break over texture
  • Dinnerware mark

Cons

  • Needs three or more coats for its finish

Who should skip it: potters who want a pure white.

Mayco Frosted Lemon (SW-169)

Pale yellow glossMayco Stoneware SW-169 Frosted Lemon Glaze, Pint
Key specs Cone 6 and 10; semi-opaque gloss yellow; pint or 10 lb dry (SD-169)

Frosted Lemon is a "semi-opaque gloss yellow glaze" with yellow and white tones. Thicker coats look more uniform, and thin areas break translucent and pool darker around texture. At cone 10 it shifts to a light pink or purple. Tiles are shown on speckled white, speckled brown and dark clay at cone 6, and Mayco shows it under and over its two fluxes. Sizes are SW-169 pint and SD-169 10 lb dry.

Pros

  • Soft yellow that pairs with speckled clay
  • Dinnerware mark

Cons

  • Turns pink or purple at cone 10

Who should skip it: cone 10 potters who want yellow.

Mayco Oyster Shell (EL-101)

Low fire pale grayMayco Elements EL-101 Oyster Shell Glaze
Key specs Cone 06; glossy pale gray, semi-transparent at 3 coats; 4 oz or pint

Oyster Shell is an Elements glaze, not Stoneware. At cone 06 it is a glossy pale gray that breaks darker gray, semi-transparent at three coats. At cone 6 it becomes an opaque cream that pools white, with more mobility and possible surface issues. Mayco shows the Dinnerware Safe icon, and our Mayco Elements page notes it is on the 2026 AP dinnerware list. Mayco warns "This glaze WILL move," so thin the bottom third. Unlike Stormy Blue and Mirror Blue, it is overglaze compatible. Sizes are 4 oz and pint.

Pros

  • Low fire neutral with a dinnerware listing
  • Small jar

Cons

  • Moves
  • Changes to cream at cone 6

Who should skip it: cone 6 potters, who should look at Alabaster.

Who should buy which

Low fire, painted designs: Speckled Stroke & Coat. Low fire neutral: Oyster Shell. Cone 6, true specks: Speckled Toad or the Speck colors. Cone 6, crystal spots: Sandstone or Sea Salt. Cone 6 plain pale glazes: Alabaster, Abalone or Frosted Lemon, ideally over a speckled clay. Our matte glaze guide explains why matte whites change so much with thickness.

Weak points

  • Specks soften with heat: Speckled Stroke & Coat blurs at cone 5/6 and up.
  • Crystal glazes need care: stirring, fanning and placement.
  • Few coat counts: most Stoneware pages show tiles but no recommended count.
  • Cone 10 shifts: Frosted Lemon, Sea Salt and Alabaster all change color.

Alternatives

For browns and darker neutrals, see Mayco earth tone glazes. For a broad comparison by firing range, read our cone 6 glazes guide, and for the base Stoneware line, the Mayco Stoneware review.

Safety notes

Read Mayco's SDS and label before use. Dry SD bags release silica dust: mix them wearing a NIOSH-approved respirator, wet-clean and never dry sweep. Mayco says its Dinnerware Safe label applies to the fired glaze used as directed and that sellers of finished ware must test it. Results on your pots depend on firing to the stated cone on a suitable clay and on testing; we never promise a glaze is food safe on your work.

Sources: Mayco Speckled Stroke & Coat line page and SP-KIT2 kit page; Mayco product pages SW-184 Speckled Toad, SW-230 Pink Speck, SW-232 Baby Blue Speck, SW-176 Sandstone, SW-118 Sea Salt, SW-106 Alabaster, SW-143 Abalone, SW-169 Frosted Lemon and EL-101 Oyster Shell; Mayco Stoneware line page; Mayco 2026 Color Guide; Mayco Dinnerware and Food Safety page; dealer listings from Krueger Pottery and Seattle Pottery Supply for price band. Specs checked November 2026.

Frequently asked questions

Is Mayco Speckled Stroke and Coat dinnerware safe?

Mayco labels the line Dinnerware Safe when fired per its instructions and certifies it AP through ACMI. Mayco also says sellers of finished ware are responsible for food-contact testing, so test your own clay and kiln before serving food on it.

Do the specks in Speckled Stroke and Coat melt?

Not at cone 06: Mayco says they do not melt or flow there. At cone 5/6 and above the specks may blur and flow slightly on vertical surfaces, and lighter specks tend to fade or burn out.

What is the base glaze for Mayco Sea Salt?

Mayco names SW-106 Alabaster as the base. For a lighter crystal effect, it suggests two coats of Alabaster and a third coat of Sea Salt.

What does Mayco Sandstone look like?

At cone 6 Mayco describes a matte off-white, with more glossy blue and purple variation where the coat is thick and crystals are heavy. At cone 10 the color darkens.

Is Mayco Oyster Shell a low fire glaze?

Yes. Oyster Shell is EL-101 in the Elements line, shown at cone 06 as a glossy pale gray. At cone 6 Mayco says it turns an opaque cream, moves more and may show surface issues.

What color is Mayco Abalone?

Mayco says Abalone fires a breaking white and mauve semi-gloss at cone 6, whiter in light coats, and darkens to purple at cone 10 reduction. Three or more coats give the full semi-gloss.

Researched and written by Muhammad Mustafa

Muhammad Mustafa researches and writes Home Pottery HQ from maker spec sheets, manuals, dealer listings and published studio guidance. He does not claim hands-on testing of products he has not used, and every page names its sources.

Specifications and availability change often. Check the product listing before you buy, and follow the manufacturer's manual for setup, weight limits and maintenance. We do not print prices because they change daily; the buttons take you to the live price. Read our affiliate disclosure.