Review

AMACO Indigo Float and Other AMACO Blue and Float Glazes

Verdict in brief

AMACO Indigo Float (PC-23) is a cone 5 to 6 Potter's Choice glaze that AMACO describes as intensely blue with a lighter blue surface float, breaking deep blue where thinner. It anchors AMACO's blue range with Sapphire Float, Blue Midnight, Arctic Blue and Lapis Flow (Potter's Choice), Teal Drift (Phase), and Mystic Tide and Aurora Breeze (Potter's Choice Flux). All go on cone 04 bisque and fire to cone 5 to 6.

On this page
  1. Verdict
  2. The eight glazes at a glance
  3. What "float" means in these names
  4. AMACO Indigo Float (PC-23)
  5. AMACO Sapphire Float (PC-24)
  6. AMACO Blue Midnight (PC-12)
  7. AMACO Arctic Blue (PC-21)
  8. AMACO Lapis Flow (PC-14)
  9. AMACO Teal Drift (PG-42)
  10. Flux members: Mystic Tide and Aurora Breeze
  11. Food safety and labels
  12. What this group does well
  13. Weak points
  14. Who should buy, and who should skip
  15. Alternatives
  16. Safety notes
  17. Frequently asked questions

Verdict

AMACO Indigo Float is the blue to start with. It is sold in pints, gallons and a dry dipping mix, it carries AP and Food Safe seals on its product page, and AMACO's layering library pairs it with more than a dozen glazes. Sapphire Float is the lighter denim blue with a white rutile float, Blue Midnight is a black that breaks blue, and Arctic Blue is the smooth, opaque light blue that AMACO keeps using as a base and an accent.

Lapis Flow is the runny one: AMACO's own blog calls it "fluid (runny)". Teal Drift, a Phase glaze, is a bright turquoise with clear coat counts. Mystic Tide and Aurora Breeze sit in this group by name, but AMACO describes them as an earthy green and a hazy pink, so read their entries before you buy them as blues.

This page is research-based. We compared AMACO's product pages, its Potter's Choice line sheet, its blog posts and the titles in its online layering library. We have not fired these glazes ourselves.

The eight glazes at a glance

Every entry comes from AMACO's product page unless the cell names another AMACO source. "Food label" is the seal shown on the product page in November 2026.

GlazeLineConeFinish and look (AMACO)Coats (AMACO)Food labelClay note
PC-23 Indigo FloatPotter's Choice5 to 6Opaque; intense blue, lighter blue floatNot publishedFood Safe seal, APNot published
PC-24 Sapphire FloatPotter's Choice5 to 6Glossy denim blue, white rutile floatNot publishedFood Safe seal, APNot published
PC-12 Blue MidnightPotter's Choice5 to 6Glossy black, blue where thickHeavy applicationFood Safe seal, APNot published
PC-21 Arctic BluePotter's Choice5 to 6Opaque light blue, tan breakHeavy applicationNo Food Safe seal on page; line sheet says food safety statusBlog: shows up well on a variety of clay bodies
PC-14 Lapis FlowPotter's Choice5 to 6Flowing soft blue to purple, green break3 brush coats, unthinnedFood Safe seal, CLBlog: breaks green depending on clay body
PG-42 Teal DriftPhase5 to 6Opaque bright turquoise3 to 4; 2 over 2 for layeringFood Safe seal, APNot published
PCF-33 Mystic TidePotter's Choice Flux5 to 6Earthy green, mottled3 even coatsFood Safe seal, AP"Beautiful on any color of clay"
PCF-16 Aurora BreezePotter's Choice Flux5 to 6Hazy pink, blue and purple hints3 even coatsFood Safe seal, AP"Beautiful on any color of clay"

AMACO's shop listed pints at roughly $22 to $27 in November 2026, with gallons where offered costing more. Check the live price at your dealer.

What "float" means in these names

A float is a lighter layer of color that forms on the surface of a darker glaze. AMACO's Phase post explains the mechanism: "Phase separation is when the glaze melts in two distinct and separate glass forms in firing, creating a float." Thickness and texture decide how much float you get, which is why AMACO keeps asking for heavy coats on these blues. Spectrum sells a whole line built on the effect; see our Spectrum floating glazes page for that brand.

AMACO Indigo Float (PC-23)

AMACO Potter's Choice PC-23 Indigo Float
Deep blue base or top coatAMACO Potter's Choice PC-23 Indigo Float Glaze, Pint
Key specs Cone 5-6; opaque deep blue with lighter float; pint or gallon
Mid-range tierCheck price on Amazon

AMACO's words: "Indigo Float is an intensely blue glaze with a lighter blue surface float. This rich cobalt glaze breaks deep blue where thinner." The page adds that it is great for layering with other Potter's Choice glazes.

  • Line: Potter's Choice, cone 5 to 6 on cone 04 bisque (line sheet)
  • Formats: pint, gallon and a dry-mix dipping glaze
  • Labels: AP and Food Safe seals on the product page
  • Coats: not published by AMACO; The Ceramic Shop recommends three thick coats, with room at the foot for the glaze to move

AMACO publishes no light vs dark clay note for PC-23, and its blog combinations are fired on No. 11 A-Mix White Stoneware. Make a test tile on your own clay before a full set.

Brush it heavy: The Ceramic Shop warns that a thin coat looks "splotchy and incomplete". If you use the dry dipping mix, AMACO says dry dipping glazes "can be difficult to layer" and behave differently from brushing glazes.

Indigo Float combinations from AMACO

  • Indigo Float on top: over PC-10 June Bug, PC-12 Blue Midnight, PC-20 Blue Rutile, PC-21 Arctic Blue, PC-40 True Celadon, PC-43 Toasted Sage, PC-44 Sage, PC-56 Ancient Copper, PC-57 Smokey Merlot, PC-59 Deep Firebrick, C-36 Iron, C-47 Jade and SH-45 Matcha Gloss
  • Indigo Float underneath: C-10 Snow over Indigo Float
  • Multi-layer stacks in AMACO's product photos: Indigo Float over PC-21 Arctic Blue over PC-12 Blue Midnight over C-1 Obsidian, and Indigo Float over HF-11 over PC-31 Oatmeal

Our AMACO glaze layering guide covers order, coat counts and drip control for stacks like these.

Pros

  • Food Safe seal
  • Three formats including gallon
  • One of AMACO's most-paired glazes

Cons

  • No coat count from AMACO
  • Thin coats look patchy

Who should skip it: Potters who want a pale or sky blue; Arctic Blue fits better.

AMACO Sapphire Float (PC-24)

Denim blue with white floatAMACO Potter's Choice PC-24 Sapphire Float Glaze
Key specs Cone 5 to 6; glossy denim blue, white rutile float; pint, gallon, dry dipping mix
Mid-range tierCheck price on Amazon

AMACO: "Sapphire Float is a glossy, denim-blue glaze with a wispy white rutile float, that breaks a green-gray color over texture." It says the rutile float "dramatically flows with texture".

  • Line: Potter's Choice, cone 5 to 6
  • Formats: pint, gallon and a dry-mix dipping glaze
  • Labels: AP and Food Safe seals on the product page
  • Coats and clay note: not published by AMACO

AMACO's library is full of Sapphire Float pairings. On top: over SH-12 Chai Matte, SH-22 Acai Matte, SH-31 Cacao Gloss, SH-32 Cacao Matte, PC-10 June Bug, PC-16 Purple Crystal, PC-67 River Rock, PCF-18 Honeydew, PCF-75 Moss Mist, C-32 Ochre and C-55 Poppy. Underneath: PC-12 Blue Midnight, PC-21 Arctic Blue, PC-22 Blue Stone, PC-46 Lustrous Jade, PC-53 Ancient Jasper and PCF-19 Cirrus Flow over Sapphire Float.

Pros

  • Lighter, more varied blue than Indigo Float
  • Strong over Shinos per AMACO's library

Cons

  • No coat count
  • Texture changes the look a lot

Who should skip it: Anyone who wants an even, flat blue.

AMACO Blue Midnight (PC-12)

Black that breaks blueAMACO Potter's Choice PC-12 Blue Midnight Glaze
Key specs Cone 5 to 6; glossy black, blue highlights where thick; pint, gallon, dry dipping mix
Mid-range tierCheck price on Amazon

AMACO: "Blue Midnight is a glossy black glaze that breaks into blue highlights where thick." It "benefits from a heavy application", which "creates more separation from the base glaze to the float", and texture strengthens the effect.

  • Line: Potter's Choice, cone 5 to 6
  • Formats: pint, gallon and a dry-mix dipping glaze
  • Labels: AP and Food Safe seals on the product page
  • Coats: heavy application; no number given

Published pairings: Blue Midnight over PC-16 Purple Crystal, PC-21 Arctic Blue and PC-24 Sapphire Float; PC-23 Indigo Float and PC-57 Smokey Merlot over Blue Midnight. AMACO's DL-12 Midnight Blue is a different dipping product and showed out of stock, so check the code when ordering.

Pros

  • Dark base that makes lighter glazes pop
  • Food Safe seal
  • Gallon size

Cons

  • Reads mostly black if applied thin
  • Easy to confuse with DL-12

Who should skip it: Potters who want a clearly blue pot, not a black one.

AMACO Arctic Blue (PC-21)

Opaque light blueAMACO Potter's Choice PC-21 Arctic Blue Glaze
Key specs Cone 5 to 6; opaque light blue, tan break; pint, gallon, dry dipping mix
Mid-range tierCheck price on Amazon

AMACO: "a beautiful, opaque light blue that has a smooth, consistent surface and breaks tan over texture." Like Blue Midnight, it "benefits from a heavy application", and AMACO says it layers very well with other Potter's Choice glazes.

  • Line: Potter's Choice, cone 5 to 6
  • Formats: pint, gallon and a dry-mix dipping glaze
  • Labels: AP seal on the product page; no Food Safe seal shown there
  • Coats: heavy application; AMACO's blog uses 2 coats as an accent

AMACO's customer-favorites post pairs 2 coats of Arctic Blue as an accent over 2 to 3 coats of PC-59 Deep Firebrick, and says both "show up well on a variety of clay bodies". The line sheet shows Arctic Blue over C-20 Cobalt; the library adds Arctic Blue over PC-24 Sapphire Float; product photos show it over PCF-16 Aurora Breeze and PCF-36 Rose Mist.

Pros

  • Smooth, predictable surface
  • Good accent over reds
  • Works on many clays per AMACO

Cons

  • No Food Safe seal on the page
  • Needs a heavy coat

Who should skip it: Potters who want movement or a float.

AMACO Lapis Flow (PC-14)

Runny blue to purpleAMACO Potter's Choice PC-14 Lapis Flow Glaze, Pint
Key specs Cone 5 to 6; flowing soft blue to purple, green break; 3 brush coats; pint
Mid-range tierCheck price on Amazon

AMACO: "Lapis Flow is a flowy glaze, varying in color from soft blue to purple and breaking green over texture." Its 2025 new-glazes post calls it "a lovely fluid (runny) glaze" that "breaks green depending on your clay body", which is AMACO's only clay remark in this group.

  • Line: Potter's Choice, cone 5 to 6 on cone 04 bisque
  • Formats: pint only
  • Labels: CL and Food Safe seals on the product page
  • Coats: 3 brush coats, unthinned, each dried first

AMACO shows it over C-57 Mulberry Celadon "for a mystical combo of deep purple and vivid blue", and says it layers over Celadons, Potter's Choice and Satin Matte glazes. Its warning that layers "may run if paired with a runny glaze" matters double here. Our AMACO Celadon glazes page covers the base glazes it pairs with.

Pros

  • Dramatic blue to purple movement
  • Clear coat count

Cons

  • Runny by AMACO's own word
  • CL seal
  • Pint only

Who should skip it: Anyone firing without cookies or a kiln-washed shelf.

AMACO Teal Drift (PG-42)

Bright turquoise Phase glazeAMACO Phase Glaze PG-42 Teal Drift, Pint
Key specs Cone 5 to 6; bright turquoise; 3 to 4 brush coats, 2 over 2 for layering; pint
Mid-range tierCheck price on Amazon

AMACO describes Teal Drift as a bright turquoise with subtle spotting where it is thick. It is a Phase glaze, which AMACO's Phase post calls opaque "even at one coat", stable alone, and able to "flow dramatically" when layered.

  • Line: Phase (PG), cone 5 to 6 on cone 04 bisque
  • Formats: pint only
  • Labels: AP and Food Safe seals on the product page
  • Coats: 3 to 4 brush coats, unthinned; 2 over 2 for layering

AMACO's Phase post shows Teal Drift over PCF-16 Aurora Breeze at 2 coats each, cone 6, and over C-1 Obsidian. Its "peacock" example uses Teal Drift dots, PC-17 Honey Flux swoops and PC-56 Ancient Copper over the whole surface. It also mixes Teal Drift with PG-55 Floating Lavender in equal parts. Product photos add Teal Drift over PC-17 Honey Flux.

Pros

  • Opaque at one coat per AMACO
  • Food Safe seal
  • Clear coat counts

Cons

  • Pint only
  • Can bubble when layered too thick, per AMACO

Who should skip it: Potters who want a deep navy.

Flux members: Mystic Tide and Aurora Breeze

Both belong to Potter's Choice Flux, a line with its own guide in our AMACO flux glazes page, so they get short entries. AMACO says both are "Good at cone 5, more fluid at cone 6", go on in 3 even coats over cone 04 bisque, are "Beautiful on any color of clay", and carry AP and Food Safe seals. Both are pint only.

AMACO Mystic Tide (PCF-33)

Earthy green flux glazeAMACO Potter's Choice Flux PCF-33 Mystic Tide Glaze, Pint
Key specs Cone 5 to 6 (more fluid at 6); earthy green, mottled; 3 coats; pint
Mid-range tierCheck price on Amazon

AMACO: "earthy green, highlighted by a subtle, mottled texture". It is green, not blue, by AMACO's description. Product photos show PC-33 Iron Lustre, PC-38 Iron Yellow, PC-70 Copper Red and PG-24 Night Rain over Mystic Tide.

Who should skip it: Anyone shopping for a blue.

AMACO Aurora Breeze (PCF-16)

Hazy pink flux glazeAMACO Potter's Choice Flux PCF-16 Aurora Breeze Glaze, Pint
Key specs Cone 5 to 6 (more fluid at 6); hazy pink, blue and purple hints; 3 coats; pint
Mid-range tierCheck price on Amazon

AMACO calls it a "hazy pink glaze with hints of blue and purple and dark speckles" that breaks over texture and forms a warm blush float where thick. Published pairings: PC-21 Arctic Blue and PC-57 Smokey Merlot over Aurora Breeze, and PG-42 Teal Drift over it.

Who should skip it: Cone 6 potters who cannot allow extra flow.

Food safety and labels

AMACO's Potter's Choice line sheet says all Potter's Choice glazes "hold a food safety status except PC-4 Palladium, PC-9 Vintage Gold and PC-64 Aventurine". Seven of the eight glazes here showed the Food Safe seal on their pages in November 2026. Arctic Blue did not, though it is not on the exception list. Lapis Flow carries AMACO's CL seal, which means a caution label applies, so read its SDS.

A Food Safe seal covers one glaze fired to the stated cone on its own. Layered blues such as Indigo Float over Blue Midnight are new glazes that no one has tested on your clay. We cannot promise any glaze here is food safe on your pots; test before using one inside a mug, and see our food safe glaze guide.

What this group does well

  • Covers navy, denim, black-blue, sky blue, turquoise and blue-purple, all at cone 5 to 6.
  • Four of the Potter's Choice blues come in gallons and dry dipping mixes.
  • AMACO publishes many named combinations between these blues, so they work as a set.
  • Seven of the eight showed the Food Safe seal on their pages.

Weak points

  • Indigo Float and Sapphire Float have no AMACO coat count.
  • Lapis Flow is runny, and layered floats move more than single coats.
  • Mystic Tide and Aurora Breeze are not blues by AMACO's own description.
  • Clay guidance is thin; most entries say nothing about dark bodies.

Who should buy, and who should skip

Buy Indigo Float for a deep cobalt you can layer, Blue Midnight as a dark base, and Arctic Blue as a smooth light blue or an accent over reds. Sapphire Float suits textured work where you want the white float to pool. Teal Drift is the easy, opaque turquoise.

Skip this family if you fire only to cone 05. Skip Lapis Flow and the flux glazes if you cannot protect your shelves with cookies or kiln wash.

Alternatives

Our AMACO Blue Rutile review covers PC-20, the other big AMACO blue. The reds and purples that pair with these blues are in our AMACO Smokey Merlot and red glazes guide. For other brands, see Mayco blue and green glazes, and for line specs and formats, the Potter's Choice glazes review.

Safety notes

  • Dry dipping mixes contain silica. Wear a NIOSH-approved respirator when mixing them, and wet clean; never dry sweep.
  • Read AMACO's SDS for each glaze, especially the CL-labeled Lapis Flow.
  • Wax the foot, keep the lowest band thinner, and fire runny or layered pieces on a cookie.
  • Follow your kiln maker's clearance and ventilation figures during glaze firings.

Sources: AMACO product pages for PC-23 Indigo Float, PC-24 Sapphire Float, PC-12 Blue Midnight, PC-21 Arctic Blue, PC-14 Lapis Flow, PG-42 Teal Drift, PCF-33 Mystic Tide and PCF-16 Aurora Breeze (shop.amaco.com); AMACO Potter's Choice line sheet (amaco.com); AMACO blog posts "Exploring Phase Glazes", "New Potter's Choice Glazes for 2025" and "Customer Favorite AMACO Glaze Combinations to Try"; AMACO layering library entry titles (amaco.com/resources/layering); The Ceramic Shop listing for PC-23. Research-based: we compare maker pages and published data and did not fire these glazes. Specs checked November 2026.

Frequently asked questions

Does AMACO Indigo Float run?

AMACO prints no run warning on the PC-23 page, but The Ceramic Shop advises leaving a little room at the foot for the glaze to move. Layered over or under a fluid glaze it moves more, so wax the foot and use a cookie until you have tested your combination.

What glazes can I use with Indigo Float?

AMACO publishes Indigo Float over Blue Midnight, Arctic Blue, Blue Rutile, Smokey Merlot, Deep Firebrick, Ancient Copper, June Bug, Sage, Toasted Sage, True Celadon, Jade, Iron and Matcha Gloss, and C-10 Snow over Indigo Float. Test any pairing on your own clay first.

What is the difference between Indigo Float and Sapphire Float?

Indigo Float is an intense cobalt blue with a lighter blue float that breaks deep blue where thin. Sapphire Float is a lighter, glossy denim blue with a wispy white rutile float that breaks green-gray over texture, so it varies more with texture.

How many coats of Indigo Float should I apply?

AMACO does not print a coat count on the PC-23 page. The Ceramic Shop recommends three thick coats and warns a thin coat looks splotchy, and AMACO’s line sheet says most Potter’s Choice glazes benefit from a heavy-handed application.

What color is AMACO Blue Midnight?

AMACO describes PC-12 Blue Midnight as a glossy black glaze that breaks into blue highlights where thick. Applied thin it reads mostly black, which is why AMACO recommends a heavy application.

Is AMACO Lapis Flow a runny glaze?

Yes. AMACO’s own blog calls PC-14 Lapis Flow a fluid (runny) glaze that varies from sky blue to purple. Apply the three unthinned coats AMACO recommends, keep the bottom band thin, and fire on a cookie or a kiln-washed shelf.

Is Mystic Tide a blue glaze?

No. AMACO describes PCF-33 Mystic Tide as an earthy green with a subtle mottled texture. It is a Potter’s Choice Flux glaze, good at cone 5 and more fluid at cone 6.

Researched and written by Muhammad Mustafa

Muhammad Mustafa researches and writes Home Pottery HQ from maker spec sheets, manuals, dealer listings and published studio guidance. He does not claim hands-on testing of products he has not used, and every page names its sources.

Specifications and availability change often. Check the product listing before you buy, and follow the manufacturer's manual for setup, weight limits and maintenance. We do not print prices because they change daily; the buttons take you to the live price. Read our affiliate disclosure.